Specifications: 330_133 PINsub Multi System

Specifications: October 22, 2018

This Specification covers the following Pinnovators Subwoofer products:

330_133 PINsub Multi System

Subwoofer / Audio Output:

Compatible with subwoofers and stereo amplifier systems with RCA inputs or 3.5mm Stereo inputs.

Speaker Inputs (Sound Board outputs):

Any electronic pinball system		Cabinet speaker, 1 Channel

Outputs:

Do not use a mono cable.
Cable: Output terminates in choice of stereo 3.5 mm male plug for subwoofers with 3.5 mm inputs OR using supplied adapter, RCA male outputs for subwoofers with RCA inputs.
PINsmx compatible: YES. PINsmx accepts 3.5mm stereo input cable.
Isolated Ground: Not referenced to system ground. If connecting two PINsub MS board outputs to one subwoofer, no need to verify grounds on inputs to subwoofer are isolated. PINsub MS output is already isolated. PINsmx Subwoofer mixer is recommended for properly mixing up to 4 game outputs and provides another level of ground isolation.

Subwoofer Output Level:

Output Level: Speaker level divided by 2
Protection: Short circuit protected. Output impedance is typically 200 Ohms and if cable to subwoofer is shorted to ground, amplifier will be protected by series output resistance.
Mix: Unmixed, Cabinet speaker only. Note: Cabinet speaker audio and Back Box audio are very similar in audio frequency range and content in our findings.