Specifications: PinPAC 7 CG1 and CG2

Version 2019/10/01 Specification covers the following products:

PinPAC 7 CG1 and CG2

Compatible for the following CPU based systems.

System
Chicago Gaming MMr, AFMr, MBr and newer systems

Subwoofer / Audio Output:

Headphone Output Level Potentiometer

Features	carbon element compact size Dual element
Specs	Power Rating: 0.25 watts Mechanical rotation 300 ° Operational Torque: 20-200 gf.cm RoHS Compliant

Outputs:

3.5mm Stereo Headphone Jack on front panel.
Direct mute control of the CPU board
Sub Cable: Output terminates in choice of stereo 3.5 mm male plug for subwoofers with 3.5 mm inputs OR using supplied adapter, RCA male outputs for subwoofers with RCA inputs.
PINsmx compatible: YES. PINsmx accepts 3.5mm stereo input cable.
Ground: Referenced to system ground. If connecting two outputs to one subwoofer, verify grounds on inputs to subwoofer are isolated! If not isolated, mute function on headphone kit may not function properly. PINsmx Subwoofer mixer is recommended for properly mixing up to 4 game outputs.

Subwoofer Output Level:

Output Level	Amplified audio from CPU audio DAC using a TDA1308 Headphone amplifier.
Protection	Short circuit protected. Output impedance is typically 200 Ohms and if cable to subwoofer is shorted to ground, amplifier will be protected by series output resistance.
Mix	Unmixed, Right channel is cabinet speaker. Left channel is backbox speakers. (due to CG system design)

Mute Function:

Notes: